Dell PowerEdge M805 - Manual (Page 359)

Configuration and Image File Commands 345
script validate
Use the script validate command in Privileged EXEC mode to validate a script file by parsing each
line in the script file.The validate option is intended for use as a tool in script development.
Validation identifies potential problems though it may not identify all problems with a given script.
Syntax
script validate scriptname
• scriptname—Name of the script file being validated. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example validates the contents of the script file config.scr.
console#script validate config.scr
show backup-config
Use the show backup-config command in Privileged EXEC mode to display the contents of the
backup configuration file.
Syntax
show backup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.