Dell PowerEdge M805 - Manual (Page 324)

306 IP Addressing Commands
www
.dell.com | support.dell.com
ip domain-lookup
Use the ip domain-lookup command in Global Configuration mode to enable IP Domain Naming
System (DNS)-based host name-to-address translation. To disable the DNS, use the no form of
this command.
Syntax
ip domain-lookup
no ip domain-lookup
Default Configuration
The DNS is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the IP Domain Naming System (DNS)-based host name-to-
address translation.
console(config)#ip domain-lookup
ip domain-name
Use the ip domain-name command in Global Configuration mode to define a default domain
name used to complete unqualified host names. To delete the default domain name, use the no
form of this command.
Syntax
ip domain-name name
no ip domain-name
• name—Default domain name used to complete an unqualified host name. Do not
include the initial period that separates the unqualified host name from the domain
name (Range: 1-255 characters).
Default Configuration
This command has no default configuration.