Dell PowerEdge M805 - Manual (Page 598)

602 IGMP Commands
www
.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 1.
console(config)#show ip igmp groups vlan 1
IP Address..................................... 0.0.0.0
Subnet Mask.................................... 0.0.0.0
show ip igmp interface
Use the show ip igmp interface command in Privileged EXEC mode to display the IGMP
information for the specified interface.
Syntax
show ip igmp interface vlan vlan-id
• vlan-id—Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IGMP information for VLAN 11.
console#show ip igmp vlan 11
Interface...................................... 11
IGMP Admin Mode................................ Enable