Dell PowerEdge M805 - Manual (Page 594)

598 IGMP Commands
www
.dell.com | support.dell.com
Syntax
ip igmp query-max-response-time tenthsofseconds
no ip igmp query-max-response-time
• tenthsofseconds—Maximum response time. (Range: 0-255 seconds)
Default Configuration
100 tenths of seconds is the default maximum response time value.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a maximum response time interval of one second for VLAN
15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-max-response-time 10
ip igmp robustness
Use the ip igmp robustness command in Interface Configuration mode to configure the robustness
that allows tuning of the interface, that is, tuning for the expected packet loss on a subnet. If a
subnet is expected to have significant loss, the robustness variable may be increased for the
interface.
Syntax
ip igmp robustnest robustness
no ip igmp robustnest
• robustness—Robustness variable. (Range: 1-255)
Default Configuration
2 is the default robustness value.
Command Mode
Interface Configuration (VLAN) mode