Show ip ospf statistics – Dell PowerEdge M805 User Manual
Page 706
712
OSPF Commands
www
.dell.com | support.dell.com
•
area-id—Identifies the OSPF area whose ranges are being displayed. (Range: IP address
or decimal from 0-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for the specified area-id.
console#show ip ospf range 20
Area ID IP Address Subnet Mask Lsdb Type Advertisement
------- ---------- --------- --------- -------------
0.0.0.20 192.168.6.0 255.255.255.0 Summary Link Enabled
show ip ospf statistics
This command displays information about recent Shortest Path First (SPF) calculations. The SPF
is the OSPF routing table calculation. The output lists the number of times the SPF has run for
each OSPF area. A table follows this information. For each of the 15 most recent SPF runs, the
table lists how long ago the SPF ran, how long the SPF took, and the reasons why the SPF was
scheduled.
Syntax
show ip ospf statistics
Default Configuration
This command has no default configuration.
Command Mode
User EXEC
User Guidelines
This command has no user guidelines.