Dell PowerEdge M805 - Manual (Page 461)

Spanning Tree Commands 453
Example
The following example sets the configuration revision to 1.
console(config)#spanning-tree mst configuration
console(config-mst)#revision 1
show (mst)
Use the show command in MST mode to display the current or pending MST region configuration.
Syntax
show {current | pending}
• current—Current MST region configuration.
• pending—Pending MST region configuration. This setting is effective after exiting mst
configuration context
Default Configuration
This command has no default configuration.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a pending MST region configuration.
console(config-mst)#show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance Vlans Mapped
-------- ------------
0 1-9,21-4094
1 10-20