Igmp proxy commands – Dell PowerEdge M805 User Manual
Page 73
Command Groups
35
IGMP Proxy Commands
ip igmp startup-query-count
Sets the number of queries sent out on startup - at
intervals equal to the startup query interval for the
interface.
IC
ip igmp startup-query-interval
Sets the interval between general queries sent at startup
on the interface.
IC
ip igmp version
Configures the version of IGMP for an interface.
IC
show ip igmp
Displays system-wide IGMP information.
PE
show ip igmp groups
Displays the registered multicast groups on the interface. PE
show ip igmp interface
Displays the IGMP information for the specified
interface.
PE
show ip igmp interface
membership
Displays the list of interfaces that have registered in the
multicast group.
PE
show ip igmp interface stats
Displays the IGMP statistical information for the
interface.
PE
ip igmp router-alert-optional
Sets IGMP to not require the Router-Alert field.
GC
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*
ip igmp-proxy
Enables the IGMP Proxy on the router.
IC
ip igmp-proxy reset-status
Resets the host interface status parameters of the IGMP
Proxy router.
IC
ip igmp-proxy unsolicited-report-
interval
Sets the unsolicited report interval for the IGMP Proxy
router.
IC
show ip igmp-proxy
Displays a summary of the host interface status parameters. PE
show ip igmp-proxy interface
Displays a detailed list of the host interface status
parameters.
PE
show ip igmp-proxy groups
Displays a table of information about multicast groups that
IGMP Proxy reported.
PE
show ip igmp-proxy groups detail
Displays complete information about multicast groups that
IGMP Proxy has reported.
PE
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*