Dell PowerEdge M805 - Manual (Page 250)

222 LLDP Commands
www
.dell.com | support.dell.com
Example 1:
console#show lldp connections
Local Remote
Interface Device ID Port ID TTL
--------- ----------------- ----------------- ----------
1/g1 01:23:45:67:89:AB 01:23:45:67:89:AC 60 seconds
1/g2 01:23:45:67:89:CD 01:23:45:67:89:CE 120 seconds
1/g3 01:23:45:67:89:EF 01:23:45:67:89:FG 80 seconds
Example 2:
console# show lldp connections detail ethernet 1/g1
1/g1 Remote Data:
Chassis ID: 01:23:45:67:89:AB
System Name: system-1
System Description:
System Capabilities: Bridge
Port ID: 01:23:45:67:89:AC
Port Description: port-1
Management Address: 192.168.112.1
TTL: 60 seconds
show lldp interface
Use the show lldp interface command in Privileged EXEC mode to display the current LLDP
interface state.
Syntax
show lldp interface {interface | all }
• interface—Specifies a valid physical interface on the switch or unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.