Dell PowerEdge M805 - Manual (Page 762)

770 PIM-SM Commands
www
.dell.com | support.dell.com
Syntax
ip pimsm cbsrhashmasklength masklength
no ip pimsm cbsrhashmasklength
• masklength—CBSR hash mask length. (Range: 0-32)
Default Configuration
30 is the default value for CBSR hash mask length.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a CBSR hash mask length of 5 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip pimsm cbsrhashmasklength 5
ip pimsm cbsrpreference
Use the ip pimsm cbsrpreference command in Interface Configuration mode to configure the
CBSR preference for a particular PIM-SM interface.
Syntax
ip pimsm cbsrpreference preference
no ip pimsm cbsrpreference
• preference—CBSR preference. (Range: 1-255)
Default Configuration
The default value for CBSR preference is 0.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.