Dell PowerEdge M805 - Manual (Page 667)

Multicast Commands 673
Example
The following example displays the results of packet rate and loss information.
console#show mstat
Results for 'show mstat 0.0.0.0'
show mtrace
Use the show mtrace command in Privileged EXEC mode to display results of multicast trace path
from the results buffer pool of the router after the execution/completion of a mtrace command.
The results will be available in the buffer pool within two minutes of completing the command. A
subsequent mtrace command overwrites the results in the buffer pool.
Syntax
show mtrace
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the results of packet rate and loss information.
console#show mtrace
Results for 'show mtrace 0.0.0.0'
Hops Away From Intermediate Mcast Protocol TTL Time Elapsed
Destination Router Address In Use Threshold Between Hops(msecs)
----------- -------------- ----------- ---------- ----------------
0 0.0.0.0