Dell PowerEdge M805 - Manual (Page 436)

428 SNMP Commands
www
.dell.com | support.dell.com
Example
The following examples display the configuration of views with and without a view name
specified.
snmp-server community
Use the snmp-server community command in Global Configuration mode to set up the
community access string to permit access to the SNMP protocol. To remove the specified
community string, use the no form of this command. This Command places the user in SNMP-
Community-Configuration mode.
Syntax
snmp-server community community-string {ro | rw | su} [ipaddress ipaddress] [view
viewname]
no snmp-server community community-string
• community-string—Permits access to the SNMP protocol. (Range: 1-20 characters)
• ro—Indicates read-only access
• rw—Indicates read-write access.
console# show snmp views
Name OID Tree Type
----------- ----------------------- ---------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded
user-view2 1.3.6.1.2.1.2.2.1.*.1 Included
console# show snmp views user-view1
Name OID Tree Type
----------- ----------------------- ----------------------------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded