Dell PowerEdge M805 - Manual (Page 46)

8 Command Groups
www
.dell.com | support.dell.com
Denial of Service Commands
DHCP Filtering Commands
no clock summer-time recurring Resets the recurring summertime configuration. GC
show clock Displays the time and date from the system clock. EXEC
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
dos-control firstfrag Enables Minimum TCP Header Size Denial of Service
protection. GC
dos-control icmp Enables Maximum ICMP Packet Size Denial of Service
protections. GC
dos-control l4port Enables L4 Port Denial of Service protection. GC
dos-control sipdip Enables Source IP Address = Destination IP Address
(SIP=DIP) Denial of Service protection. GC
dos-control tcpflag Enables TCP Flag Denial of Service protections. GC
dos-control tcpfrag Enables TCP Fragment Denial of Service protection. GC
show dos-control Displays Denial of Service configuration information. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
ip dhcp filtering Enables DHCP filtering globally. GC
ip dhcp filtering trust Configures an interface as trusted for DHCP filtering
purposes IC
show ip dhcp filtering Displays the DHCP filtering configuration. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*