Show ip dvmrp, Show ip dvmrp interface – Dell PowerEdge M805 User Manual
Page 587
DVMRP Commands
589
console#configure
console(config)#ip dvmrp trapflags
console(config)#no ip dvmrp trapflags
show ip dvmrp
Use the show ip dvmrp command in Privileged EXEC mode to display the system-wide
information for DVMRP.
Syntax
show ip dvmrp
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide information for DVMRP.
console(config)#show ip dvmrp
Admin Mode..................................... Disable
Version........................................ 3
Total Number of Routes......................... 0
Reachable Routes .............................. 0
DVMRP INTERFACE STATUS
Interface Interface Mode Protocol State
--------- --------------- ---------------
show ip dvmrp interface
Use the show ip dvmrp interface command in Privileged EXEC mode to display the interface
information for DVMRP on the specified interface.