Dell PowerEdge M805 - Manual (Page 803)

Virtual Router Redundancy Protocol Commands 817
Syntax
ip vrrp vr-id priority priority
no ip vrrp vr-id priority
• vr-id—The virtual router identifier. (Range: 1-255)
• priority—Priority value for the interface. (Range: 1-254)
Default Configuration
priority has a default value of 100.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration mode sets the priority value for the virtual
router for VLAN 15.
console(config-if-vlan15)#ip vrrp 5 priority 20
ip vrrp timers advertise
Use the ip vrrp timers advertise command in Interface Configuration mode to set the frequency, in
seconds, that an interface on the specified virtual router sends a virtual router advertisement. Use
the no form of the command to return the advertisement frequency to the default value.
Syntax
ip vrrp vr-id timers advertise seconds
no ip vrrp vr-id priority
• vr-id—The virtual router identifier. (Range: 1-255)
• seconds—The frequency at which an interface on the specified virtual router sends a
virtual router advertisement. (Range: 1-255 seconds)
Default Configuration
seconds has a default value of 1.
Command Mode
Interface Configuration (VLAN) mode