Dell PowerEdge M805 - Manual (Page 525)

VLAN Commands 521
Static configuration:
PVID: 2922
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled
Port 2/g19 is member in:
VLAN Name Egress rule Type
---- --------- ----------- -----
2921 Primary A untagged Static
2922 Community A1 untagged Static
show port protocol
Use the show port protocol command in Privileged EXEC mode to display the Protocol-Based
VLAN information for either the entire system or for the indicated group.
Syntax
show port protocol [groupid | all]
• groupid—The protocol-based VLAN group ID, which is automatically generated when
you create a protocol-based VLAN group with the vlan protocol group command.
• all—Enter all to show all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for either the entire
system.
console#show port protocol all
Group
Group Name ID Protocol(s) VLAN Interface(s)
---------------- ------ ----------- ---- ------------------------
test 1 IP 1 1/g1