Dell PowerEdge M805 - Manual (Page 369)

QoS Commands 357
Example
The following example displays mapping for IP DSCP 1 and traffic class 2.
console(config)#classofservice ip-dscp-mapping 1 2
classofservice trust
Use the classofservice trust command in either Global Configuration mode or Interface
Configuration mode to set the class of service trust mode of an interface. To set the interface mode
to untrusted, use the no form of this command.
Syntax
classofservice trust {dot1p|ip-precedence|ip-dscp}
no classofservice trust
• dot1p—Specifies that the mode be set to trust dot1p (802.1p) packet markings.
• ip-precedence—Specifies that the mode be set to trust IP Precedence packet markings.
• ip-dscp—Specifies that the mode be set to trust IP DSCP packet markings.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays how you set the class of service trust mode of an interface to
trust dot1p (802.1p) packet markings when in Global Configuration mode.
console(config)#classofservice trust dot1p
The following example displays how you set the class of service trust mode of an interface to
trust IP Precedence packet mark
console(config)#classofservice trust ip-precedence