Dell PowerEdge M805 - Manual (Page 704)

710 OSPF Commands
www
.dell.com | support.dell.com
loopback2 Disable 0.0.0.0 1 10 40 5 1 1
show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display the statistics for a
specific interface. The information is only displayed if OSPF is enabled.
Syntax
show ip ospf interface stats vlan vlan-id
• vlan-id—Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan15
OSPF Area ID........................................... 0.0.0.0
Area Border Router Count....................... 0
AS Border Router Count.......................... 0
Area LSA Count........................................ 1
IP Address..............................................2.2.2.2
OSPF Interface Events.............................. 1
Virtual Events............................................ 0
Neighbor Events..................................... 0
External LSA Count.................................. 0
show ip ospf neighbor
Use the show ip ospf neighbor command in Privileged EXEC mode to display information about
OSPF neighbors. The information below only displays if OSPF is enabled and the interface has a
neighbor.