Dell PowerEdge M805 - Manual (Page 550)

548 Web Server Commands
www
.dell.com | support.dell.com
ip https port
Use the ip https port command in Global Configuration mode to configure a TCP port for use by a
secure web browser to configure the switch. To use the default port, use the no form of this
command.
Syntax
ip https port port-number
no ip https port
• port-number—Port number for use by the secure HTTP server. (Range: 1 - 65535)
Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the https port number to 100.
console(config)#ip https port 100
ip https server
Use the ip https server command in Global Configuration mode to enable the switch to be
configured, monitored, or modified securely from a browser. To disable this function, use the no
form of this command.
Syntax
ip https server
no ip https server
Default Configuration
The default for the switch is disabled.
Command Mode
Global Configuration mode