Dell PowerEdge M805 - Manual (Page 748)

754 OSPFv3 Commands
www
.dell.com | support.dell.com
Virtual Events................................. 13
Neighbor Events................................ 6
External LSA Count............................. 0
LSAs Received.................................. 660
Originate New LSAs............................. 853
Sent Packets................................... 1013
Received Packets............................... 893
Discards....................................... 48
Bad Version.................................... 0
Virtual Link Not Found......................... 9
Area Mismatch.................................. 39
Invalid Destination Address.................... 0
No Neighbor at Source Address.................. 0
Invalid OSPF Packet Type....................... 0
Packet Type Sent Received
-------------------- ---------- ----------
Hello 295 219
Database Description 10 14
LS Request 4 4
LS Update 521 398
LS Acknowledgement 209 282
show ipv6 ospf interface vlan
Use the show ipv6 ospf interface vlan command in Privileged EXEC mode to display OSPFv3
configuration and status information for a specific vlan.
Syntax
show ipv6 ospf interface vlan {vlan-id| brief}
• vlan-id—Valid VLAN ID. Range is 1-4093.
• brief—Displays a snapshot of configured interfaces.
Default Configuration
This command has no default configuration.