Dell PowerEdge M805 - Manual (Page 599)

IGMP Commands 603
Interface Mode................................. Enable
IGMP Version................................... 3
Query Interval (secs).......................... 125
Query Max Response Time (1/10 of a second)..... 100
Robustness..................................... 2
Startup Query Interval (secs) ................. 31
Startup Query Count............................ 2
Last Member Query Interval (1/10 of a second).. 10
Last Member Query Count........................ 2
show ip igmp interface membership
Use the show ip igmp interface membership command in Privileged EXEC mode to display the
list of interfaces that have registered in the multicast group. If detail is specified, this command
displays detailed information about the listed interfaces
Syntax
show ip igmp interface membership groupaddr [detail]
• groupaddr—Group IP address
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in the multicast
group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
IGMP INTERFACE MEMBERSHIP INFO
Interface Interface IP State Group Compat Source Filter
Mode Mode
--------- --------------- ------------ ------------ -------------