Dell PowerEdge M805 - Manual (Page 213)

IGMP Snooping Commands 183
IGMP Snooping Commands
ip igmp snooping (global)
Use the ip igmp snooping command in Global Configuration mode to globally enable Internet
Group Management Protocol (IGMP) snooping.
Syntax
ip igmp snooping [vlan-id]
no ip igmp snooping
Default Configuration
IGMP snooping is disabled.
Command Mode
Global Configuration mode
User Guidelines
IGMP snooping is enabled on static VLANs only and is not enabled on Private VLANs or their
community VLANs.
Example
The following example enables IGMP snooping.
console(config)# ip igmp snooping
ip igmp snooping (interface)
Use the ip igmp snooping command in Interface Configuration mode to enable Internet Group
Management Protocol (IGMP) snooping on a specific interface. To disable IGMP snooping on an
Ethernet interface, use the no form of this command.
Syntax
ip igmp snooping