Dell PowerEdge M805 - Manual (Page 55)

Command Groups 17
IP Addressing Commands
802.1x Commands
Command Description Mode*
clear host Deletes entries from the host name-to-address cache PE
helper address Enable forwarding User Datagram Protocol (UDP)
Broadcast packets received on an interface. IC
interface out-of-band Brings up the OOB port configuration menu. GC
ip address Sets a management IP address on the switch. GC
ip address dhcp Acquires an IP address on an interface from the DHCP
server. GC
ip address vlan Sets the management VLAN. GC
ip default-gateway Defines a default gateway (router). GC
ip domain-lookup Enables IP DNS-based host name-to-address translation. GC
ip domain-name Defines a default domain name to complete unqualified
host names. GC
ip helper address Allows the device to forward User Datagram Protocol
(UDP) broadcasts received on an interface. GC
ip host Configures static host name-to-address mapping in the
host cache. GC
ip name-server Configures available name servers. GC
show arp switch Displays the entries in the ARP table. PE
show hosts Displays the default domain name, a list of name server
hosts, static and cached list of host names and addresses. PE
show ip helper address Displays the ip helper addresses configuration. PE
show ip interface management Displays the management IP interface information. UE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
aaa authentication dot1x Specifies one or more authentication, authorization and
accounting (AAA) methods for use on interfaces running
IEEE 802.1X. GC
dot1x max-req Sets the maximum number of times the switch sends an
EAP-request frame to the client before restarting the
authentication process. IC