Bridge multicast forward-all, Bridge multicast forward-unregistered – Dell PowerEdge M805 User Manual
Page 148
114
Address Table Commands
www
.dell.com | support.dell.com
bridge multicast forward-all
Use the bridge multicast forward-all command in Interface Configuration mode to enable
forwarding of all Multicast packets. To restore the default, use the no form of the bridge multicast
forward-all command.
Syntax
bridge multicast forward-all
no bridge multicast forward-all
Default Configuration
Forward-unregistered
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
In this example all VLAN1 Multicast packets are forwarded.
console(config-if-vlan1)#bridge multicast forward-all
bridge multicast forward-unregistered
Use the bridge multicast forward-unregistered command in Interface Configuration mode to
enable the forwarding of unregistered multicast addresses.
Syntax
bridge multicast forward-unregistered
Default Configuration
Forward-unregistered
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
If routers exist on the VLAN, do not change the unregistered multicast addresses state to drop
on the routers ports.