Dell PowerEdge M805 - Manual (Page 385)

QoS Commands 373
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
The port identified in this command is identical to the destination port of the monitor
command.
Example
The following example displays how to copy all the data to ethernet port 1/g5.
console(config-policy-classmap)#mirror 1/g5
police-simple
Use the police-simple command in Policy-Class-Map Configuration mode to establish the traffic
policing style for the specified class. The simple form of the police command uses a single data rate
and burst size, resulting in two outcomes: conform and nonconform.
Syntax
police-simple {<datarate> <burstsize> conform-action {drop | set-cos-transmit <cos> |
set-prectransmit <cos> | set-dscp-transmit <dscpval> | transmit} [violateaction {drop |
set-cos-transmit <cos> | set-prec-transmit <cos> | set-dscp-transmit <dscpval> |
transmit}]}
• datarate—Data rate in kilobits per second (kbps). (Range: 1–4294967295)
• burstsize—Burst size in Kbps (Range: 1–128)
• conform action—Indicates what happens when the packet is conforming to the policing
rule: it could be dropped, it could have its COS modified, it could have its IP precedence
modified, or it could have its DSCP modified. The same actions are available for packets
that do not conform to the policing rule.
• cos—Class of Service value. (Range: 0 - 7)
• dscpval—DSCP value. (Range: 0 - 63 or a keyword from this list, af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode