Dell PowerEdge M805 - Manual (Page 372)

360 QoS Commands
www
.dell.com | support.dell.com
console(config)#cos-queue strict 1 2 4
diffserv
Use the diffserv command in Global Configuration mode to set the DiffServ operational mode to
active. While disabled, the DiffServ configuration is retained and can be changed, but it is not
activated. When enabled, DiffServ services are activated. To set the DiffServ operational mode to
inactive, use the no form of this command.
Syntax
diffserv
no diffserv
Default Configuration
This command default is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to set the DiffServ operational mode to active.
console(Config)#diffserv
drop
Use the drop command in Policy-Class-Map Configuration mode to specify that all packets for the
associated traffic stream are to be dropped at ingress.
Syntax
drop
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode