Dell PowerEdge M805 - Manual (Page 52)

14 Command Groups
www
.dell.com | support.dell.com
Port Monitor Commands
PHY Diagnostics Commands
System Management Commands
Command Description Mode*
monitor session Configures a port monitoring session. GC
show monitor session Displays the port monitoring status. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
show copper-ports cable-length Displays the estimated copper cable length attached to a
port. PE
show copper-ports tdr Displays the last TDR (Time Domain Reflectometry) tests
on specified ports. PE
show fiber-ports optical-
transceiver Displays the optical transceiver diagnostics. PE
test copper-port tdr Diagnoses with TDR (Time Domain Reflectometry)
technology the quality and characteristics of a copper cable
attached to a port. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
asset-tag Specifies the switch asset-tag. GC
cut-through mode Enables the cut-through mode on the switch. GC
hostname Specifies or modifies the switch host name. GC
ip address Sets a static OOB port IP address. IC (out-of-
band)
ip address none Disables DHCP/BOOTP on the OOB port. IC (out-of-
band)
ip address {dhcp/bootp} Enables DHCP/BOOTP on the OOB port. IC (out-of-
band)
member Configures the switch. SG
movemanagement Moves the Management Switch functionality from one
switch to another. GC