Dell PowerEdge M805 - Manual (Page 381)

QoS Commands 369
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
The ip dscp, ip precedence, and ip tos match conditions are alternative ways to specify a
match criterion for the same Service Type field in the IP header but with a slightly different
user notation.
This specification is the free form version of the IP DSCP/Precedence/TOS match
specification in that you have complete control of specifying which bits of the IP Service Type
field are checked.
Example
The following example displays adding a match condition based on the value of the IP TOS
field in a packet.
console(config-classmap)#match ip tos AA EF
match protocol
Use the match protocol command in Class-Map Configuration mode to add to the specified class
definition a match condition based on the value of the IP Protocol field in a packet using a single
keyword notation or a numeric value notation.
Syntax
match protocol {protocol-name|protocol-number}
• protocol-name—Specifies one of the supported protocol name keywords. The supported
values are icmp, igmp, ip, tcp, and udp.
• protocol-number—Specifies the standard value assigned by IANA. (Range 0 - 255)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.