Dell PowerEdge M805 - Manual (Page 695)

OSPF Commands 701
User Guidelines
The command prompt changes when the router ospf command executes.
Example
The following example enters into router OSPF mode.
console(config)#router ospf
console(config-router)#
show ip ospf
Use the show ip ospf command in Privileged EXEC mode to display information relevant to the
OSPF router.
Syntax
show ip ospf
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays OSPF router information.
console#show ip ospf
Router ID...................................... 5.5.5.5
OSPF Admin Mode................................ Enable
ASBR Mode...................................... Enable
RFC 1583 Compatibility......................... Enable
ABR Status..................................... Disable
Exit Overflow Interval......................... 0
Spf Delay Time................................. 20
Spf Hold Time.................................. 30
External LSA Count............................. 0