Dell PowerEdge M805 - Manual (Page 64)

26 Command Groups
www
.dell.com | support.dell.com
SSH Commands
spanning-tree disable Disables spanning tree on a specific port. IC
spanning-tree forward-time Configures the spanning tree bridge forward time. GC
spanning-tree hello-time Configures the spanning tree bridge Hello Time. GC
spanning-tree link-type Overrides the default link-type setting. IC
spanning-tree max-age Configures the spanning tree bridge maximum age. GC
spanning-tree mode Configures the spanning tree protocol. GC
spanning-tree mst configuration Enables configuring an MST region by entering the
multiple spanning-tree (MST) mode. GC
spanning-tree mst cost Configures the path cost for multiple spanning tree (MST)
calculations. IC
spanning-tree pathcost method Configures the spanning tree default pathcost method GC
spanning-tree mst max-hops Configures the number of hops in an MST region before
the BPDU is discarded and port information is aged out. GC
spanning-tree mst port-priority Configures port priority. IC
spanning-tree mst priority Configures the switch priority for the specified spanning
tree instance. GC
spanning-tree portfast Enables PortFast mode. IC
spanning-tree port-priority Configures port priority. IC
spanning-tree priority Configures the spanning tree priority. GC
spanning-tree root protection Enables the root protection function on a switch. IC
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
crypto key generate dsa Generates DSA key pairs for the switch. GC
crypto key generate rsa Generates RSA key pairs for the switch. GC
crypto key pubkey-chain ssh Enters SSH Public Key-chain configuration mode. GC
ip ssh port Specifies the port to be used by the SSH server. GC
ip ssh pubkey-auth Enables public key authentication for incoming SSH
sessions. GC
ip ssh server Enables the switch to be configured from a SSH server
connection. GC
Command Description Mode*