Dell PowerEdge M805 - Manual (Page 165)

Clock Commands 131
User Guidelines
This command is relevant for both received Unicast and Broadcast.
Example
The following defines SNTP trusted-key.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode to enable a client to
use Simple Network Time Protocol (SNTP) predefined Unicast clients. To disable an SNTP
Unicast client, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
Examples
The following example enables the device to use Simple Network Time Protocol (SNTP) to
request and accept SNTP traffic from servers.
console(config)# sntp unicast client enable
clock timezone hours-offset
Use the clock timezone hours-offset [minutes minutes-offset] [zone acronym] command to set the
offset to Coordinated Universal Time (UTC). If the optional parameters are not specified, they will
be read as either '0' or '\0, as appropriate.