Dell PowerEdge M805 - Manual (Page 798)

810 Virtual LAN Routing Commands
www
.dell.com | support.dell.com
vlan routing
Use the vlan routing command in VLAN Database mode to create routing on a VLAN. Use the no
form of the command to remove routing on the specified VLAN.
Syntax
vlan routing vlan-id
no vlan routing vlan-id
• vlan-id—VLAN identifier. (Range: 1-4093)
Default Configuration
Disabled is the default configuration.
Command Mode
VLAN Database mode
User Guidelines
This command has no user guidelines.
Example
The following example creates routing on VLAN 10.
console#vlan database
console(config-vlan)#vlan routing 10