Dell PowerEdge M805 - Manual (Page 702)

708 OSPF Commands
www
.dell.com | support.dell.com
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display the information for
the VLAN or loopback interface.
Syntax
show ip ospf interface {vlan vlan-id | loopback loopback-id}
• vlan-id—Valid VLAN ID.
• loopback-id—Shows information the specified loopback interface. (Range: 0-7)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the information for the IFO object or virtual interface tables
associated with VLAN 3.
console#show ip ospf interface vlan 3
IP Address..................................... 3.1.1.2
Subnet Mask.................................... 255.255.255.0
Secondary IP Address(es).......................
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.1
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1