Dell PowerEdge M805 - Manual (Page 421)

RMON Commands 413
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the RMON event table.
console> show rmon events
Index Description Type Community Owner Last time sent
----- ----------- --------- ---------- ------- ---------------------
1 Errors Log CLI Jan 18 2005 23:58:17
2 High Broadcast Log-Trap switch Manager Jan 18 2005 23:59:48
The following table describes the significant fields shown in the display:
show rmon history
Use the show rmon history command in User EXEC mode to display RMON Ethernet Statistics
history. Also see the rmon history command.
Syntax
show rmon history index [throughput | errors | other] [period seconds]
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in
the log table for each event. In the case of trap, an SNMP trap is sent to one or
more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any
events, this value is zero.