Dell PowerEdge M805 - Manual (Page 277)

System Management Commands 255
Syntax
reload [unit]
• unit —Unit number to be reloaded.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If no unit is specified, all units are reloaded.
Example
The following example displays how to reload the stack.
console#reload 1
Management switch has unsaved changes.
Would you like to save them now? (y/n)n
Configuration Not Saved!
Are you sure you want to reload the switch? (y/n) y
Reloading management switch 1.
set description
Use the set description command in Stack Global Configuration mode to associate a text
description with a switch in the stack.
Syntax
set description unit description
• unit—The switch identifier.
• description—The text description. (Range: 1 - 80 alphanumeric characters)
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode