Yaskawa G7 Drive - Manual (Page 17)

1
-4
„ Drive Model Numbers
The model number of the Drive on the nameplate indicates the specification, voltage class, and maximum
motor capacity of the Drive in alphanumeric codes.
Fig 1.2 Drive Model Numbers
„ Drive Specifications
The SPEC number on the nameplate indicates the voltage, Drive rating, enclosure type, and the revision code
of the Drive in alphanumeric codes. The SPEC number for Drives that have custom features, i.e. CASE
software, will have a SPEC number that indicates the custom features installed.
Fig 1.3 Drive Specifications
TERMS
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Drive is mounted in a control panel.
NEMA Type 1 (IEC IP20)
The Drive is shielded from the exterior, and can thus be mounted to the interior wall of a standard building
(not necessarily enclosed in a control panel). The protective structure conforms to the standards of NEMA 1
in the USA.
Top protective cover must be installed to conform with IEC IP20 and NEMA 1 Type 1 requirements. Refer to
Fig. 1.4 for details.
No. Spec
UL Specification
CIMR – G7 U 2 0P4
AC Drive
U
No. Voltage
2
4 3-phase, 208-240Vac
3-phase, 480Vac
Rating
G7 Family
2 0P4 1
No.
2
4
Voltage
AC input, 3-phase, 200-240V
AC input, 3-phase, 380-480V
No. Enclosure Type
0 Open chassis (IEC IP00)
1 NEMA Type 1 (IEC IP20)
No.
0P4 0.4kW
0P7 0.75kW
to
300kW *
to
Max. Motor Capacity
t
300
“P” indicates the decimal point