Yaskawa G5HHP Drive - Manual (Page 178)

Advanced Operation
7.2.3 Setting Motor Constants
7 - 14
J
Motor Line-to-line Resistance: E2-05
User
Change
during Setting Factory
Valid Access Levels
User
Constant
Number
Name
g
during
Opera-
tion
Setting
Range
Unit Factory
Setting V/f
Control
V/f with
PG
Open
Loop
Vector
Flux
Vector
E2-05
Motor line-to-line re-
sistance
x
0.000 to
65.000
Ω 0.020 A A A A
D
This setting is used as a reference value for the torque compensation function.
D
The default setting depends upon the Inverter capacity.
(The table shows the default settings for 400-V class, 200 kW Inverters.) (See page 8 - 42.)
D
Set the motor’s terminal resistance (U--V, V--W, and W--U). Normally this value isn’t shown on the mo-
tor nameplate, so it might be necessary to contact the motor manufacturer.
7