Yaskawa G5HHP Drive - Manual (Page 89)

4.2 Modes
4 - 21
4.2.5 Initialize Mode
The initialize mode is used to select the language displayed by the Unit, the access level, and the control
method; it is also used to initialize the Unit’s user constants. The structure of the initialize mode is shown
in Figure 4.7.
Operation mode
Initialize mode
Programming mode
Language
Password
Function Selection A2
Access level
Control mode
Initialize
A2-02 User Pram 2
A2-32 User Pram 32
A2-01 User Pram 1
Accessible/settable only in Advanced setting level.
MENU
Fig 4.7 Structure of Initialize Mode User Constants
4