Yaskawa G5HHP Drive - Manual (Page 333)

10.1 Maintenance and Inspection
10 - 9
5. After removing the terminal screws, remove wires.
Protective cover mounting screws
(M4 round head screws)
Terminal screws
Fig 10.7
6. Remove wires from the PCB located on the right side of the Module. Remove the following connectors.
30CN (3-pin VH connector)
15CN (6-pin VH connector)
7CN (MDR plug, M2.6 screw)
SG (M4 round head screws)
30CIN
15CN
SG
MDR
Duct
Fig 10.8
10