Yaskawa G5HHP Drive User Manual
Page 230
Advertising
Advanced Operation
7.5.5 External Terminal Functions: H
7 - 66
Speed Control Integral Reset (Setting: E)
OFF
Operates with PI-control speed control loop.
ON
Operates with P-control speed control loop. (The speed control integral values are reset by the
integral time constant.)
D
This function is valid only for V/f control with PG feedback when constant F1-07 is set to 0. (Setting
F1-07 to 0 disables integral operation during acceleration/deceleration.)
D
It is possible to switch between these speed control modes during operation.
7
Advertising