Yaskawa G5HHP Drive - Manual (Page 198)

Advanced Operation
7 - 34
Group
Control Meth-
od
Comments Function Group
F
lux
Ve
ctor
Open
-loop
Vector
V/
fw
/P
G
V/
f
Comments Function
H1 Multi-function Inputs Function selection for multi-function inputs f f f f
H2 Multi-function Outputs Function selection for multi-function outputs f f f f
H Terminal
H3 Analog Inputs Function selection for analog inputs f f f f
H Terminal
H4
Multi-function Analog Out-
puts
Function selection for analog outputs f f f f
H5
MEMOBUS Communica-
tions
MEMOBUS communications settings f f f f
L1 Motor Overload Sets electrical/thermal functions that protect the motor. f f f f
L2 Power Loss Ridethru Selects the power-loss processing method. f f f f
L3 Stall Prevention Accel/Decel stall prevention settings and selection f f f f
L Protection
L4 Reference Detection Frequency detection settings and selection f f f f
L Protection
L5 Fault Restart Fault restart function settings f f f f
L6 Torque Detection Sets overtorque detection functions 1 and 2 f f f f
L7 Torque Limit Not used. (Can’t be set.) f f f f
L8 Hardware Protection Hardware overheating and open-phase protection settings f f f f
o Operator
o1 Monitor Select Selects the Operator’s display and setting methods. x x
f f
o Operator
o2 Key Selections Operator’s key function selection and other constants f f f f
7