Yaskawa G5HHP Drive - Manual (Page 80)

Setting User Constants
4.2.4 Operation Mode
4 - 12
4.2.4 Operation Mode
Operation mode is the mode in which the Inverter can be operated.
Many user constants can’t be changed when the Inverter is operating. Refer to User Constant List for details.
The following monitor displays are possible in operation mode: The frequency reference, output frequency,
output current, and output voltage, as well as fault information and the fault history.
When running the Inverter, press the MENU Key first to enter the operation mode and then press the DATA/EN-
TER Key from the operation mode display to bring up the monitor display.
Run commands can’t be received from any other display. Once the Inverter is running, it can be switched to
other modes.
4
IMPORTANT