Yaskawa G5HHP Drive - Manual (Page 335)

10.1 Maintenance and Inspection
10 - 11
9. Remove M12 nuts, washers, S washers, and M12x38 square thread bolts used for connecting the “+” and
“-” bus bar of the Module.
Remove M12 bolts, etc.
When attaching them, be
careful of the bolt direction.
Fig 10.11
10. Remove M12 nuts, washers, S washers, and M12x38 square thread bolts used for connecting the U/
V/W bus bar of the Module and the bus bar on the Inverter Panel.
Remove M12 bolts,
etc.
u v
w
Fig 10.12
10