Sony GP-X1EM Grip Extension User Manual
Page 135
135
Setting the border (menu)
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.1) appears.
3
Press [Border], turning it on.
4
Set the following parameters.
To apply color to a border
1
In the <Border Mode> group, press [Flat Color].
2
Set the following parameters.
To soften the inner edge of a border
1
Press [Border Soft].
2
Set the following parameter.
To add a beveled light edge
1
In the <Border Mode> group, press [Beveled Light
Edge].
2
Set the following parameters.
3
If setting the softness of the border, press [Border
Soft], turning it on.
4
Set the following parameters.
To add a beveled color edge
1
In the <Border Mode> group, press [Beveled Color
Edge].
2
In the <Color Adjust> group, select the edges for
adjustment.
Select [Top], [Left], [Right], or [Bottom]. To adjust all
four edges simultaneously, press [All].
3
Set the following parameters.
4
If setting the softness of the border, press [Border
Soft], turning it on.
5
Set the following parameters.
Setting the border (device control block)
You can adjust the border width of the top/bottom/left/
right edges in the device control block (trackball).
The [BDR/CROP] button must be assigned to the
operation buttons beforehand in the Setup menu
.
1
Enable the resizer as described in steps
1
to
3
in
“Reducing, enlarging, rotating, and moving keys
(device control block)” (page 132)
No.
Parameter
Adjustment
1
H
Simultaneously adjust border width
of left and right edges
2
V
Simultaneously adjust border width
of top and bottom edges
3
All
Simultaneously adjust border width
on all edges
4
Density
Border density
No.
Parameter
Adjustment
1
Luminance
Luminance
2
Saturation
Saturation
3
Hue
Hue
No.
Parameter
Adjustment
1
Inner Soft
Softness of inner edge of border
No.
Parameter
Adjustment
1
Top
Position of top side
2
Left
Position of left side
3
Right
Position of right side
4
Bottom
Position of bottom side
5
All
Position of all four sides
No.
Parameter
Adjustment
1
Inner Soft
Softness of inner edge of border
2
Bound Soft Softness of border boundary
No.
Parameter
Adjustment
1
Luminance
Luminance
2
Saturation
Saturation
3
Hue
Hue
No.
Parameter
Adjustment
1
Inner Soft
Softness of inner edge of border
2
Bound Soft Softness of border boundary
Note
No.
Parameter
Adjustment