Copy and swap, Overview – Sony GP-X1EM Grip Extension User Manual

Page 187

Advertising

187

Copy and Swap

Overview

You can copy or swap the settings between switcher banks
or between keyers.
The following settings can be copied or swapped.
• Settings for the M/E banks and PGM/PST bank
• Keyer settings
• Wipe settings
• Independent key wipe settings
• DME wipe settings
• Independent key DME wipe settings
• Matte color settings (color 1, color 2, and how to

compose them)

• Color settings
• DME channel settings
You can also copy settings using simple button operations

(see page 188)

For details about copying a cross-point pad, see “Copying
Cross-Point Pad Settings” (page 437).

M/E copy and M/E swap

You can copy and swap all bank settings between the
M/E-1 and PGM/PST banks.

If a DME is being used on the copy source M/E bank, then
if for example there are insufficient DME channels, it may
not be possible to select the DME.
There are no such restrictions on a swap.

Keyer copy and keyer swap

You can copy and swap the key settings between keyers.

If a DME is being used on the copy source keyer, swap
source keyer, or swap destination keyer, then if for
example there are insufficient DME channels, or the limit
on using DME channels within an M/E bank is exceeded,
it may not be possible to select the DME.

Wipe copy and wipe swap

You can copy and swap wipe settings between banks.

Wipe copy and wipe swap for independent
key transitions

You can copy and swap wipe settings between keyers.

DME wipe copy and DME wipe swap

You can copy and swap DME wipe settings between
banks.

DME wipe copy and DME wipe swap for
independent key transitions

You can copy and swap DME wipe settings between
keyers.

Target bank

Target data