Sony GP-X1EM Grip Extension - Manual (Page 544)

544
Saving and Loading a File
For a newly created file, if you create a directory on a
removable drive and move the file to the prescribed
location, you can then load the file using File >All,
External File >All menu (7161).
When modifying a file saved on the switcher, be sure to
save it in the original directory.
Example path:
Removable Drive\Sample\MACRO\CTRLCPU\
nnnnnnnn.PNL_rrrr.PMR
Errors
If any of the following problems occur, it is not possible to
load the file. Attempting to load the file will produce an
error message.
• If there is a syntax error.
• If a required parameter is not present.
For details, see “Error Messages” (page 559).
Correspondence Between Events and Symbols
For details about events, see “Events” (page 347).
Note
Removable drive Any directory
MACRO
CTRLCPU
nnnnnnnn.PNL_rrrr.PMR
Event Symbol Using Continue
Select cross-point in the AUX bus control block (AUX bus operation mode) AuxXpt No
Select cross-point in the AUX bus control block (router operation mode) RouterXpt Yes
Select cross-point in the cross-point control block MEXpt Yes
Auto transition and take in the transition control block MEAutoTransition Yes
Cut in the transition control block MECut No
Select transition type TransitionType No
Set next transition NextTransition No
Enable/disable pattern limit PatternLimit No
Execute fade-to-black FadeToBlack No
Auto transition in an independent key transition KeyAutoTransition Yes
Key on/off in an independent key transition KeyCut Yes
Select independent key transition type KeyTransitionType No
Set VTR/disk recorder/frame memory clip start point StartTc Yes
Play VTR/disk recorder/frame memory clip Play Yes
Stop VTR/disk recorder/frame memory clip Stop Yes
Cue-up VTR/disk recorder/frame memory clip Cue Yes
Fast forward VTR/disk recorder/frame memory clip FF Yes
Rewind VTR/disk recorder/frame memory clip Rewind Yes