Sony GP-X1EM Grip Extension - Manual (Page 375)

375
Creating and Editing a Macro
Timeline
This section describes how to set actions, and add
keyframe points. Path settings are not needed for a macro
timeline.
For details about keyframe creation, see “Creating and
Editing Keyframes” (page 310).
Registering a keyframe
The operations for registering use the Macro >Timeline
>Timeline menu (5441) and the [INS] button in the utility/
shotbox control block.
1
Press the [KF MCRO EDIT] button in the utility/
shotbox control block, and press the [EDIT ENBL]
button, turning it on.
This switches the memory recall section to effect
editing mode.
2
Open the Macro >Timeline >Timeline menu (5441).
3
In the “Action” list on the right, select the action
(Recall, Take, Take All, or No Action).
When Recall or Take is selected, select the number of
the macro register.
a) When Recall is selected
b) When Take is selected
4
Press [Set].
The selected action appears in the list on the left.
5
Press the [INS] button in the utility/shotbox control
block.
This creates keyframe 1 on the macro timeline.
To set the action for a rewind operation
On the macro timeline, when the [REWIND] button in the
utility/shotbox control block is pressed, the action set for the
first keyframe is not executed, but when the [RUN] button
is pressed, then the first keyframe action is executed.
To execute an action when the [REWIND] button is
pressed, it is necessary to set this action (Rewind Action).
To set the Rewind Action, press [Rewind Action] in the
Macro >Timeline >Timeline menu (5441) to open the
Rewind Action menu (5441.1). Operate in the same way as
in the Timeline menu (5441).
Alternatively, you can make settings in the Setup menu so
that when the [REWIND] button is pressed, this executes
the action set for the first keyframe, and when the [RUN]
button is pressed the first keyframe action is not executed.
In this case, the Rewind Action setting is still enabled.
For details, see “Setting the first keyframe when rewind is
executed” (page 431).
No. Parameter Adjustment
3 a) Recall No Number of macro register to recall
3
b)
Take No Number of macro register to
execute