Sony GP-X1EM Grip Extension User Manual
Page 561
561
Icon
Message
Description
Activate License
The license key you entered is invalid.
Please check and enter again.
7316.7: Engineering Setup >System >Install/Unit Config >License >License
Management
The Activate License procedure failed because the entered information was
incorrect.
Check the license key, and enter again.
Change Password
Failed.
The password was not changed.
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
7317.2: Engineering Setup >System >Maintenance >File Load Lock
The password could not be changed.
Couple
Cannot couple while playing back or
locking is in progress.
2124: Frame Memory >File >Pair Recombination
Pair file cannot be created because the target file is being played back or is
locked
.
Coupling has been canceled.
Duration of two files are different.
2124: Frame Memory >File >Pair Recombination
Pair file cannot be created because the durations of the two target files are
different.
Error
This operation is canceled, because
the register is locked.
Please change the register status to
be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
6411.2: Shotbox >Register >Store/Recall >Key Snapshot Edit
When [Store] was pressed, the target register was locked.
Unlock the register before executing [Store].
The file was not able to be read.
7142.1: File >Shotbox, Macro >Macro >File Edit
When [Off Line Edit] was pressed, the selected file could not be read.
Select the file again, and press [Off Line Edit] once more.
It was not possible to make a file.
7142.3: File >Shotbox, Macro >Macro >File Edit >Off Line Edit
The file could not be written when saving.
Try to save once more.
“Source” and “Target” are the same
directory.
Please change the “Source” or the
“Target” directory.
7161: File >All, External File >All
The same directory was selected for source and target.
Select different directories.
The Source and the target are the
same directory.
Please change the source or the
target directory.
7172: File >Configure >Unit ID Copy
The same directory and ID were selected for source and target.
Select different directories and IDs.
It failed.
Please confirm the server address.
7311: Engineering Setup >System >Network Config
An incorrect server address was entered.
Enter the correct server address.
Invalid IP address.
7311.2: Engineering Setup >System >Network Config >IP Address
7311.7: Engineering Setup >System >Network Config >NMOS
7355.1: Engineering Setup >DCU >Serial/Net Port Assign >P-Bus Setting
7355.8: Engineering Setup >DCU >Serial/Net Port Assign >AMP Setting
7355.9: Engineering Setup >DCU >Serial/Net Port Assign >General tcp/ip
Setting
An incorrect IP address was entered.
Enter the correct IP address.
File Frame Memory
Some requests are skipped.
Following operation is not permitted.
– Loading that will cause duplicate
register name.
7151: File >Frame Memory >Frame Memory
A file with the same name already exists in storage when loading a file.