Sony GP-X1EM Grip Extension - Manual (Page 360)

360
1) State with numeric keypad control block (see page 351) , utility/
shotbox control block (see page 351) , or Flexi Pad control block (see
page 356) switched to macro editing mode.
2
In any of the following menus, select the same register
recalled in step
1 , and press [On Line Edit].
• Macro >Register >Attach menu (5411)
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu
(7142.1)
The On Line Edit menu (7142.2) appears, and you can
now carry out online editing of the events for the
recalled register. Also, the control block of the control
panel operated in step
1 is assigned to control editing
operations.
In the following cases, [On Line Edit] is disabled and
it is not possible to display the On Line Edit menu.
• When the recalled register and the register selected
in the menu are different.
• When a device other than [Register] is selected in
the File >Shotbox, Macro >Macro >File Edit menu
(7142.1).
• If the recalled register is locked.
On Line Edit menu
a Register number
Shows the number of the register (1 to 999) being edited.
b Register name
Shows the name of the register being edited.
c Event number
Shows the current event number. When the [FROM TO]
button in the utility/shotbox control block is pressed to
select a range of events, this appears as a range, “From X
To Y.”
The event number reflects the position of the cursor in the
macro register creation list.
d Remaining Memory
Shows the percentage of memory still available for
recording events.
Note
a Register number
b Register name
c Event number
d Remaining
Memory
e Macro register creation list
f ALL button
g Macro creation event list
h Insert Before button
i Insert After button
j Delete button
k Modify button
l <Prev button
m >Next button