Sony GP-X1EM Grip Extension - Manual (Page 319)

319
You can also use the [TRIM] button to enter a
difference value
(see page 310) .
4
Press the [ENTER] button to confirm the entry.
Path Settings
The term “path” (see page 300) refers to the specification
of how interpolation is carried out from one keyframe to
the next.
Set keyframe paths in the Key Frame >Path menu (6113).
Basic Path Setting Operations
This section describes an example using key 1 on the
M/E-1 bank to make path settings.
Selecting the category
In the Key Frame >Path menu (6113), from the buttons in
the function button area, select the category for which you
want to make the setting.
First row: Path settings for the switcher M/E-1 to M/E-5,
and PGM/PST banks
Second and third rows: Path settings for User1 to User8
Fourth row: Path settings for DME local channel and
global channel 3D transforms and effects
To select the M/E-1 bank, select [M/E-1] in the first row,
and open the M/E-1 menu (6113.1).
Making switcher path settings
The area for the VF buttons in the Key Frame >Path
>M/E-1 menu (6113.1) shows the names of items.
A
B sign by a button indicates that pressing it opens a more
detailed setting menu.
The status area shows the settings for Xpt, Hue, and Curve.
However, depending on the item, these parameters may or
may not be present.
Whenever you set a path or modify its setting, be sure to
press the [KF MCRO EDIT] button in the utility/shotbox
control block to switch to keyframe/macro editing mode,
and press the [EDIT ENBL] button and then [MOD]
button. The setting does not become effective unless the
[MOD] button is pressed.
Note