Sony GP-X1EM Grip Extension - Manual (Page 321)

321
Effect Execution
By using the [RUN] button in the utility/shotbox control
block, you can replay the effect as a continuous sequence
of images. This is referred to as effect execution
(see
page 303) .
It is also possible to execute an effect from the Flexi Pad
control block or device control block.
For details about effect operations in the device control
block, see “Device Control Block (Trackball)” (page 40).
Effect Execution (Utility/Shotbox
Control Block)
Use the keyframe control buttons in the utility/shotbox
control block to execute the keyframe effect recalled using
the numeric keypad control block.
Utility/shotbox control block
Executing an effect automatically
1
Use the region selection buttons in the numeric keypad
control block to select the target region of the
operation.
For details about region selection, see “Region
selection in the numeric keypad control block”
(page 307).
2
Use the numeric keypad to enter the number of the
register in which the effect you want to execute is
saved, and press the [ENTER] button to confirm.
This recalls the effect saved in the register.
3
Press the [RUN] button in the utility/shotbox control
block.
The [RUN] button lights amber and the effect is
executed automatically.
Executing an effect manually (fader lever)
Use the transition control block fader lever as a keyframe
fader.
In step
3 of “Executing an effect automatically”
(page 321) , operate the fader lever.
To use the transition control block fader lever as
a keyframe fader
You can also assign the [KF] button functions to a button
in the transition control block
(see page 412) .
Press the [KF] button, turning it on, to execute a keyframe
effect with the fader lever.
• It is not possible for the [KF] button to be enabled for
multiple banks (M/E or PGM/PST) at the same time. If
you press the [KF] button in more than one bank, only
the last button pressed remains enabled.
• If a macro is assigned to the transition control block
fader lever, then while in use as a keyframe fader the
macro is not executed.
Moving to the first keyframe of the effect
Press the [REWIND] button.
Moving to the last keyframe of the effect
Press the [FF] button. Alternatively, press the [REV]
button, turning it on, and press the [REWIND] button.
Setting the Run Mode
You can set the mode for executing effects using the
[RUN] button in the utility/shotbox control block.
Specifying the effect execution direction
To specify the effect execution direction, press the
[NORM] button or the [REV] button, turning it on.
To execute the effect so as to obtain the effects of the
[NORM] and [REV] buttons alternately, press the
[NORM/REV] button, turning it on.
When the [NORM] button is lit: The effect is executed
in the direction from the first keyframe to the last
keyframe.
REV button
RUN button
REWIND button FF button
Notes